Passive Sills, the Cork-based manufacturer of insulated windowsills, has announced that it has achieved British Board of Agrément (BBA) certification.
A family Bed & Breakfast in Glenties, Co Donegal built during the last boom has lowered its energy bills and improved comfort thanks to a suite of upgrade measures that included a new Daikin air source heat pump.
Tramex, the Irish manufacturer of moisture meters for the building design and construction industries, has emphasised the critical importance of testing and monitoring moisture conditions within buildings as airtightness and insulation standards continue to increase.
A new Dublin passive house is aiming to achieve the required standard of airtightness using using an innovative new application of Blowerproof liquid airtight membrane. Blowerproof liquid airtight membrane is a BBA certified product with Class C fire rating, which has been used widely on passive house projects across Europe for the last 10 years.
Towards Zero Energy Ltd has just completed eight months monitoring of five dwellings in the Dublin region that it upgraded to A1 BERs last year under SEAI’s Deep Retrofit Pilot Programme. The dwellings were typical suburban 1950s to 1970s two-storey, semi-detached/terraced houses and all were three or four bedrooms in size.
Ecological Building Systems have announced the addition of a new thermal modelling service to their existing array of technical services. Ecological technical team member Joe Fitzgerald recently successfully completed the National Standards Authority of Ireland (NSAI) approved thermal modellers examination in Dublin Technological University. Fitzgerald is now listed on the NSAI thermal modellers register.
VentHeat, a new Irish company specialising in heating, ventilation and air conditioning systems for passive house and low energy buildings, has launched the Pichler PKOM4 compact heat pump system to the Irish market. The system combines heating, cooling, ventilation and domestic hot water in one passive house certified unit with a footprint of less than 0.75 m2.
Antrim-based company Showersave say that the imminent inclusion of wastewater heat recovery in the new DEAP 4.2.0 software, set to be launched on 16 September, will provide developers, designers and builders with a simple and cost-effective new way to help ensure Part L compliance and achieve better building energy ratings.