Green groups criticise lack of focus on embodied carbon.
The European Commission is proposing sweeping changes to the way in which energy ratings for buildings are allocated, in a bid to stimulate the retrofit of the worst performing buildings across Europe.
Leading sustainable building association the
AECB has secured funding to create an
international resource to share detailed information
on low energy buildings in the UK, Ireland
and, ultimately, internationally, via a rebuild of
the Low Energy Buildings Database (LEBD).
The Royal Institute of Architects of Ireland (RIAI) has launched its 2030 Climate Challenge, calling for urgent action to be taken by architects and the wider construction industry to tackle the climate emergency.
The UK and Ireland’s oil heating industry says it has taken a “major step forward” in the use of biofuels in domestic oil boilers, with early tests concluding that hydrotreated vegetable oil (HVO) works in virtually all existing oil boilers.
Ahead of the Built Environment Summit (28-29 October) and COP26 (1-12 November), the Royal Institute of British Architects (RIBA) and Architects Declare have published a report demonstrating the critical role the sector must play in reducing greenhouse gas emissions.
In the #BuildingLife ambassador spotlight series, Passive House Plus is profiling leaders who have endorsed the Irish Green Building Council’s call to address the environmental impacts of buildings across their life-cycle..
The Department of Housing has come under criticism for draft guidelines which would prevent local authorities from setting sustainable building targets for buildings as a planning condition, with the passive house standard and low carbon cement directly referenced.
The Passive House Institute celebrated the low energy standard’s 30th birthday at the 25th International Passive House Conference in September. Around seven hundred participants registered for the conference, which mostly took place online due to Covid.
A new analysis of the exposure of London households to indoor pollutants highlights “systematic inequalities” in exposure, overwhelmingly driven by factors beyond the control of those people worst affected.
The winners of the international Passive House Award will be announced on Friday 10 September as part of the 25th International Passive House Conference, which is fully available online. Tickets to the conference are still available.
Partel has upgraded the performance and functionality of its Acraline Roll adhesive with new technical features. The company said that Acraline offers a “unique sealing solution for membranes” in the construction of passive house and low energy buildings.
Retrokit, the Irish clean tech start-up whose software platform helps housing professionals to make evidence-based decisions for energy upgrade projects, has tailored its software for one-stop-shops managing retrofits under the national home energy upgrade programme.
Leading Irish window manufacturer Munster Joinery has emphasised the importance of environmental product declarations (EPDs) for reducing embodied carbon in buildings. The company sees reducing embodied carbon as the next major step for the industry after tackling operational energy.
A new school building in Cork City
built by Irish offsite timber specialist
Lidan Designs has achieved a remarkably
low embodied carbon score, according
to an analysis performed by sustainable
building consultant John Butler.
Despite the uncertainty created by the global pandemic, Galway based
ventilation manufacturer ProAir Systems has been busy
optimising its lineup of products and putting in place a number of
measures to enhance its…
A semi-detached house in Inchicore, Dublin
has seen its BER boosted from a G to an
A rating thanks to a deep retrofit by Dublinbased
retrofit contractor Energlaze and a new
Viessmann air-to-water heat…
Partel’s Alma Vert recycled structural panel
and Lunos Silvento ec exhaust system were
commended in the ‘best exterior product’, and
‘best renewable product’ categories respectively at
the Architects’ Choice Product Awards 2021, as
The National Construction Training Centre in County Laois is aiming to meet the challenge of training the huge number of skilled workers needed for Ireland’s planned housebuilding and deep retrofitting…
In the #BuildingLife ambassador spotlight series, Passive House Plus is profiling leaders who have endorsed the Irish Green Building Council’s call to address the environmental impacts of buildings across their lifecycle.
With signs that the corporate world may be starting to move from greenwashing to genuinely grappling with sustainability via environmental, social and governance reporting (ESG), will this create opportunities for the widespread adoption of evidence-based sustainable building? Archie O’Donnell, Passive House Association of Ireland board member and environmental manager with i3PT, finds reasons for optimism.
While there is much debate about whether we should prioritise retrofitting homes or installing heat pumps, the climate crisis means we may not have a choice but to do both as fast as possible, writes Toby Cambray.
In his latest column on the history of low energy building during the 20th century, Dr Marc
Ó Riain looks back at the Saskatchewan House, which was built in Canada in 1977, and
established the principle of prioritising energy demand reduction over active systems.
We won’t be able to reduce the embodied carbon of construction fast enough just by switching to lower carbon materials, says Pat Barry of the Irish Green Building Council, so we urgently need smart design that allows us to build with less, and to create a genuine circular economy for building materials.
Does the energy rating of homes actually reflect their real-world performance? Dr Shane Colclough, vice chair of the Passive House Association of Ireland, outlines the growing importance of post-occupancy analysis.
Under its new housing plan, the government wants the state to acquire more land for housebuilding. But why has it failed to use the vast land banks it already owns? Mel Reynolds runs the rule over the figures.
Once poorly understood by the mainstream building industry, airtightness is now increasingly seen as one of the most crucial objectives on any building project. Not only is it vital for energy efficiency, it’s also key for thermal comfort and for protecting a building’s structure from dampness and mould. In this comprehensive guide to airtightness, we look at why it’s so important, how exactly it’s measured, and most importantly, how to achieve it on site.
While understanding wall and roof insulation is relatively straightforward, insulation under the ground floor can be a bit of a mystery by comparison. Not only is it buried in the ground, but there are notoriously tricky spots like the wall-floor junction that need to be detailed and insulated properly. And the design of your foundation often depends on site conditions and the type of structure you’re going to build, too. In this guide, we explain some different ways of insulating one of the most challenging parts of the building envelope.
As electricity supply from renewable sources continues to grow, and electricity grids gradually decarbonise as dirtier fossil fuels are phased out, heating homes with electrical technologies like heat pumps starts to make more sense. And in the mild, temperate climate of Britain and Ireland, air source heat pumps are particularly suitable — especially as new build standards of energy efficiency continue to tighten, meaning new homes need less and less energy to achieve comfortable indoor temperatures. But how do air source heat pumps work, what types are there, and how much do they cost to run? Our in-depth guide attempts...
Building physics take no prisoners. Anyone designing, constructing or upgrading the thermal envelope of a building to modern energy performance levels is duty bound to understand and minimise thermal bridging, or suffer the consequences. One-man thermal bridging encyclopaedia Andrew Lundberg of Passivate, who teaches thermal bridging analysis at Dublin Institute of Technology, gives some practical advice on why and how to tackle thermal bridging head on, and describes some of the leading innovations in thermally broken components.